Miniature 1/32 DIN Process Indicator

• 3-1/2-Digit Display with 10 mm Digits
• User-Selectable Inputs of 0-2 Vdc, 0-20 Vdc and 4-20 mA
• Minimal Panel Depth, Less than 80 mm
• 0.1% Accuracy
• 8-30 Vdc Power
• Scalable to Engineering Units, with Selectable Decimal Point

The DPM35 is a compact process indicator, requiring less than 80 mm of depth behind a panel. This instrument utilises a 43 x 21.5 mm cutout, 1/32 DIN, with large, 10 mm display digits. Inputs are connected via a rear screw clamp connector.


The DPM35 can be jumper configured to accept one of three input ranges, 0-2 Vdc, 0-20 Vdc or 4-20 mA. In addition, the unit can be scaled for both zero and span, to display in engineering units. The decimal point position is also jumper selected.


The compact DPM35 is a 1/32 DIN size meter, with a bezel of 24 H x 48 mm W (0.946" x 1.9"). For comparison, a 1/16 DIN square bezel is 48 mm square (1.9"), a 1/8 DIN rectangular bezel is 48 x 96 mm (1.9" x 3.8") and a 1/4 DIN square bezel is 96 mm (3.8") square.

SPECIFICATIONS Display: 3-1/2-digit, 0 to 1,999; red LED; 7-segment, 10 mm Inputs: jumper selected, 0-2 Vdc, 0-20 Vdc or 4-20 mA Input Configuration: bipolar single A/D Converter: dual-slope, average value Reading Rate: 3 per second CMRR: 65 dB Warm-up to Rated Accuracy: 2 min. Polarity: automatic, minus sign indicator Accuracy: ±0.1% + 1 count Span Tempco: 80 ppm Zero Tempco: 2 µV/°C OverRange: 1._ _ _

Decimal Point: jumper select for either 1.XXX, 1X.XX, or 1XX.X Operating Ambient: 0 to 50°C Storage Ambient: -40 to 80°C Power: 8 to 30 Vdc Ripple: 10% Power Consumption: 2 W max. Electrical Connection: screw clamp connector Dimensions: 24 H x 48 W x 70 mm D (0.946" x 1.9" x 2.75") Panel Cutout: 21.5 x 43 mm (0.857" x 1.7") DIN 43700 Weight: 60 g (2.1 oz)